1. Advisor
  2. unicorn
  3. functions
  4. unicorn.x86_const.UC_X86_REG_RDI
View all unicorn analysis

How to use the unicorn.x86_const.UC_X86_REG_RDI function in unicorn

To help you get started, we’ve selected a few unicorn examples, based on popular ways it is used in public projects.

Secure your code as it's written. Use Snyk Code to scan source code in minutes - no build needed - and fix issues immediately.

github fgsect / unicorefuzz / example_module / config.py View on Github external
def place_input(uc, input):
    import util
    from unicorn.x86_const import UC_X86_REG_RDI, UC_X86_REG_RSI 

    if len(input) > 512:
        import os
        os._exit(0) # probably too big anyway.

    # ulong decode_negTokenInit(char *security_blob, ulong length, byte *param_3) => RDI, RSI, ... 

    # read input to the correct position at param rdi here:
    rdi = uc.reg_read(UC_X86_REG_RDI)
    #rsi = uc.reg_read(UC_X86_REG_RSI)
    util.map_page_blocking(uc, rdi) # ensure security_blob is mapped
    uc.mem_write(rdi, input) # insert afl input
    uc.reg_write(UC_X86_REG_RSI, len(input)) # write length
github fgsect / unicorefuzz / example_module / config.py View on Github external
def place_input_skb(ucf: Unicorefuzz, uc: Uc, input: bytes) -> None:
    """
    Places the input in memory and alters the input.
    This is an example for sk_buff in openvsswitch
    """

    if len(input) > 1500:
        import os

        os._exit(0)  # too big!

    # read input to the correct position at param rdx here:
    rdx = uc.reg_read(UC_X86_REG_RDX)
    rdi = uc.reg_read(UC_X86_REG_RDI)
    ucf.map_page_blocking(uc, rdx)  # ensure sk_buf is mapped
    bufferPtr = struct.unpack("
github fgsect / unicorefuzz / example_module / config.py View on Github external
def place_input_skb(uc, input):
    """
    Places the input in memory and alters the input.
    This is an example for sk_buff in openvsswitch
    """
    import util
    import struct
    from unicorn.x86_const import UC_X86_REG_RDX, UC_X86_REG_RDI

    if len(input) > 1500:
        import os
        os._exit(0) # too big!

    # read input to the correct position at param rdx here:
    rdx = uc.reg_read(UC_X86_REG_RDX)
    rdi = uc.reg_read(UC_X86_REG_RDI)
    util.map_page_blocking(uc, rdx) # ensure sk_buf is mapped
    bufferPtr = struct.unpack("
github alanvivona / pwnshop / src / 0x19-crackme-darkflow-3 / emu.py View on Github external
def reset():
    emu = unicorn.Uc(unicorn.UC_ARCH_X86, unicorn.UC_MODE_64 + unicorn.UC_MODE_LITTLE_ENDIAN)

    emu.mem_map(SEGMENT_FS_ADDR-0x1000, 0x3000)
    set_fs(emu, SEGMENT_FS_ADDR)
    set_gs(emu, SEGMENT_GS_ADDR)

    emu.reg_write(unicorn.x86_const.UC_X86_REG_RAX, 0x5555555583c0)
    emu.reg_write(unicorn.x86_const.UC_X86_REG_RBX, 0x0)
    emu.reg_write(unicorn.x86_const.UC_X86_REG_RCX, 0x400)
    emu.reg_write(unicorn.x86_const.UC_X86_REG_RDX, 0x7ffff7dcc960)
    emu.reg_write(unicorn.x86_const.UC_X86_REG_RSP, 0x7fffffffdc90)
    emu.reg_write(unicorn.x86_const.UC_X86_REG_RBP, 0x7fffffffdc90)
    emu.reg_write(unicorn.x86_const.UC_X86_REG_RSI, 0x0)
    emu.reg_write(unicorn.x86_const.UC_X86_REG_RDI, 0x5555555583c0)
    emu.reg_write(unicorn.x86_const.UC_X86_REG_RIP, 0x555555555269)
    emu.reg_write(unicorn.x86_const.UC_X86_REG_R8, 0x0)
    emu.reg_write(unicorn.x86_const.UC_X86_REG_R9, 0x5555555582b0)
    emu.reg_write(unicorn.x86_const.UC_X86_REG_R10, 0x7ffff7dd2800)
    emu.reg_write(unicorn.x86_const.UC_X86_REG_R11, 0x246)
    emu.reg_write(unicorn.x86_const.UC_X86_REG_R12, 0x5555555550b0)
    emu.reg_write(unicorn.x86_const.UC_X86_REG_R13, 0x7fffffffdd90)
    emu.reg_write(unicorn.x86_const.UC_X86_REG_R14, 0x0)
    emu.reg_write(unicorn.x86_const.UC_X86_REG_R15, 0x0)
    emu.reg_write(unicorn.x86_const.UC_X86_REG_EFLAGS, 0x202)
    emu.reg_write(unicorn.x86_const.UC_X86_REG_CS, 0x33)
    emu.reg_write(unicorn.x86_const.UC_X86_REG_SS, 0x2b)
    emu.reg_write(unicorn.x86_const.UC_X86_REG_DS, 0x0)
    emu.reg_write(unicorn.x86_const.UC_X86_REG_ES, 0x0)
    emu.reg_write(unicorn.x86_const.UC_X86_REG_FS, 0x0)
    emu.reg_write(unicorn.x86_const.UC_X86_REG_GS, 0x0)
github cea-sec / Sibyl / sibyl / engine / qemu.py View on Github external
def __init__(self, *args, **kwargs):
        import unicorn.x86_const as csts
        self.regs = {
            "RAX": csts.UC_X86_REG_RAX, "RBX": csts.UC_X86_REG_RBX,
            "RCX": csts.UC_X86_REG_RCX, "RDI": csts.UC_X86_REG_RDI,
            "RDX": csts.UC_X86_REG_RDX, "RSI": csts.UC_X86_REG_RSI,
            "RBP": csts.UC_X86_REG_RBP, "RSP": csts.UC_X86_REG_RSP,
             "R8": csts.UC_X86_REG_R8, "R11": csts.UC_X86_REG_R11,
            "R9": csts.UC_X86_REG_R9, "R10": csts.UC_X86_REG_R10,
            "R12": csts.UC_X86_REG_R12, "R13": csts.UC_X86_REG_R13,
            "R14": csts.UC_X86_REG_R14, "R15": csts.UC_X86_REG_R15,
        }
        self.pc_reg_name = "RIP"
        self.pc_reg_value = csts.UC_X86_REG_RIP
        super(UcWrapCPU_x86_64, self).__init__(*args, **kwargs)
github r00tus3r / r00tEmu / utils.py View on Github external
def dump_regs(mu, address, size):
    f = open("dump_regs","a+")
    f.write(">>> Tracing instruction at 0x%x, instruction size = 0x%x\n" %(address, size))
    rax = mu.reg_read(unicorn.x86_const.UC_X86_REG_RAX)
    rbx = mu.reg_read(unicorn.x86_const.UC_X86_REG_RBX)
    rcx = mu.reg_read(unicorn.x86_const.UC_X86_REG_RCX)
    rdx = mu.reg_read(unicorn.x86_const.UC_X86_REG_RDX)
    rsi = mu.reg_read(unicorn.x86_const.UC_X86_REG_RSI)
    rdi = mu.reg_read(unicorn.x86_const.UC_X86_REG_RDI)
    rbp = mu.reg_read(unicorn.x86_const.UC_X86_REG_RBP)
    rsp = mu.reg_read(unicorn.x86_const.UC_X86_REG_RSP)
    rip = mu.reg_read(unicorn.x86_const.UC_X86_REG_RIP)
    r8 = mu.reg_read(unicorn.x86_const.UC_X86_REG_R8)
    r9 = mu.reg_read(unicorn.x86_const.UC_X86_REG_R9)
    r10 = mu.reg_read(unicorn.x86_const.UC_X86_REG_R10)
    r11 = mu.reg_read(unicorn.x86_const.UC_X86_REG_R11)
    r12 = mu.reg_read(unicorn.x86_const.UC_X86_REG_R12)
    r13 = mu.reg_read(unicorn.x86_const.UC_X86_REG_R13)
    r14 = mu.reg_read(unicorn.x86_const.UC_X86_REG_R14)
    r15 = mu.reg_read(unicorn.x86_const.UC_X86_REG_R15)

    f.write(">>> RAX = 0x%x\n" %rax)
    f.write(">>> RBX = 0x%x\n" %rbx)
    f.write(">>> RCX = 0x%x\n" %rcx)
    f.write(">>> RDX = 0x%x\n" %rdx)
github r00tus3r / r00tEmu / emulate.py View on Github external
def init_reg(mu):
    mu.reg_write(unicorn.x86_const.UC_X86_REG_RAX, 0x0)
    mu.reg_write(unicorn.x86_const.UC_X86_REG_RBX, 0x0)
    mu.reg_write(unicorn.x86_const.UC_X86_REG_RCX, 0x0)
    mu.reg_write(unicorn.x86_const.UC_X86_REG_RDX, 0x0)
    mu.reg_write(unicorn.x86_const.UC_X86_REG_RSI, 0x0)
    mu.reg_write(unicorn.x86_const.UC_X86_REG_RDI, 0x0)
    mu.reg_write(unicorn.x86_const.UC_X86_REG_RBP, 0x0)
    mu.reg_write(unicorn.x86_const.UC_X86_REG_RSP, 0x7fffffffe0a0)
    mu.reg_write(unicorn.x86_const.UC_X86_REG_R8, 0x0)
    mu.reg_write(unicorn.x86_const.UC_X86_REG_R9, 0x0)
    mu.reg_write(unicorn.x86_const.UC_X86_REG_R10, 0x0)
    mu.reg_write(unicorn.x86_const.UC_X86_REG_R11, 0x0)
    mu.reg_write(unicorn.x86_const.UC_X86_REG_R12, 0x0)
    mu.reg_write(unicorn.x86_const.UC_X86_REG_R13, 0x0)
    mu.reg_write(unicorn.x86_const.UC_X86_REG_R14, 0x0)
    mu.reg_write(unicorn.x86_const.UC_X86_REG_R15, 0x0)

unicorn

Unicorn CPU emulator engine

GitHub
GPL-2.0
Latest version published 1 month ago

Package Health Score

88 / 100
Full package analysis

Popular unicorn functions

Similar packages