mailrise

An SMTP gateway for Apprise notifications.

Description

Mailrise is an SMTP server that converts the emails it receives into Apprise notifications. The intended use case is as an email relay for a home lab or network. By accepting ordinary email, Mailrise enables Linux servers, Internet of Things devices, surveillance systems, and outdated software to gain access to the full suite of 60+ notification services supported by Apprise, from Matrix to Nextcloud to your desktop or mobile device.

Just as email brought written messages into the 21st century, Mailrise brings email notifications into the year 2021 and beyond. Compared to a conventional SMTP server, it's more secure, too—no more replicating your Gmail password to each of your Linux boxes!

> "After a few very negative experiences with mail providers and their > detection of spam accounts in the last year... F––k email. I will > never set up a mail account for notifications. And with Mailrise I > don't have to anymore!" > > -- > u/Sarcism

A Mailrise daemon is configured with a list of Apprise configuration files. Email senders encode the name of the desired configuration file into the recipient address. Mailrise then constructs the resulting Apprise notification(s) using the selected configuration.

A minimalist Mailrise configuration, for example, might contain a single Apprise configuration for Pushover:

configs:
  pushover:
    urls:
      - pover://[...]

And email senders would be able to select this configuration by using the recipient address:

pushover@mailrise.xyz

By appending . to the username component of the address, it is also possible to specify one of the four Apprise notification types, which, if the service you selected supports it, will change the color of the icon of the resulting notification:

discord.failure@mailrise.xyz

Email attachments will also pass through to Apprise if the addressed notification service(s) support attachments.

Mailrise is the sucessor to SMTP Translator, a previous project of mine that articulated a similar concept but was designed solely for Pushover.

Installation

As a Docker container

An official Docker image is available from Docker Hub. To use it, you must bind mount a configuration file to /etc/mailrise.conf. This mount must be a file, not a directory, and it cannot override anything else in /etc.

Notes for NAS users

Consumer NAS operating systems often conceal Docker's controls behind a GUI that is opaque and difficult to troubleshoot. There are some known gotchas when using Mailrise with one:

• Unraid can only passthrough directories, not files, making it impossible to bind mount the mailrise.conf file. (While attempting to do so, some users have accidentally passed through their entire /etc directory, thereby completely breaking Python.) To fix this, override the image's default command with something like -v /etc/myconfig/mailrise.conf so you can passthrough the myconfig directory without interfering with the rest of the filesystem.
• TrueNAS SCALE runs containers as root by default. This breaks Mailrise, which is designed to run as a non-root container for enhanced security. Ensure the container is running as user 999 and group 999.

From PyPI

You can find Mailrise on PyPI. The minimum Python version is 3.8+.

Once installed, you should write a configuration file and then configure Mailrise to run as a service. Here is the suggested systemd unit file:

[Unit]
Description=Mailrise SMTP notification relay

[Service]
ExecStart=/usr/local/bin/mailrise /etc/mailrise.conf

[Install]
WantedBy=multi-user.target

From source

This repository is structured like any other Python package. To install it in editable mode for development or debugging purposes, use:

pip install -e .

To build a wheel, use:

tox -e build

If you are using Visual Studio Code, a development container is included with all the Python tooling necessary for working with Mailrise.

Configuration

The mailrise program accepts a path to a YAML configuration file that encapsulates the daemon's entire configuration. The root node of this file should be a dictionary. Mailrise accepts the following keys (periods denote sub-dictionaries):

Template strings

You can use Python's template strings to specify custom templates that Mailrise will construct your notifications from. Templates make use of variables that communicate information about the email message. Use dollar signs ($) to insert variables.

The following variables are available for both title and body templates:

Sample file

If you are new to YAML syntax, you may find the Online YAML Parser, which converts YAML syntax to the underlying JSON structure, a useful aid.

configs:

  # You can send to this config with "basic_assistant@mailrise.xyz".
  #
  # The "-" is *very* important, even when configuring just a single URL.
  # Apprise requires urls to be a YAML *list*.
  #
  basic_assistant:
    urls:
      - hasio://HOST/ACCESS_TOKEN

  # You can send to this config with "telegram_and_discord@mailrise.xyz".
  #
  telegram_and_discord:
    urls:
      - tgram://MY_BOT_TOKEN
      - discord://WEBHOOK_ID/WEBHOOK_TOKEN
    # You can also control the layout of the message with custom template
    # strings.
    mailrise:
      title_template: "Urgent: ${body}"
      body_template: ""
      body_format: text

  # You can send to this config with "my_cool_name@mycooldomain.com".
  #
  my_cool_name@mycooldomain.com:
    urls:
      - pover://USER_KEY@TOKEN

  # We also support wildcards with the fnmatch library; see
  # https://docs.python.org/3/library/fnmatch.html for the full syntax.
  #
  # YAML requires characters like "*" and "[" to be enclosed in quoted
  # strings.
  #
  # This pattern matches addresses like "awesomeperson@mycooldomain.com"
  # and "awesomemail@mycooldomain.com".
  #
  "awesome*@mycooldomain.com":
    urls:
      - pover://USER_KEY@TOKEN

  # Of course, it's also possible to pattern match by the domain.
  #
  "my_cool_name@*.net":
    urls:
      - pover://USER_KEY@TOKEN

  # Wildcard targets are evaluated in the order they appear in the
  # configuration file, and Mailrise uses the first match. So, this config
  # will catch any addresses not matched by the previous targets.
  #
  # Note that if you use "*" as your pattern, Mailrise will expand that to
  # "*@mailrise.xyz", which is probably not the catch-all target you wanted.
  #
  "*@*":
    urls:
      - discord://WEBHOOK_ID/WEBHOOK_TOKEN
      # You can also insert environment variables, a feature lifted directly
      # from Home Assistant. This is useful for reading secrets from
      # container orchestrators like Kubernetes.
      - !env_var MY_SECRET_URL

# Finally, you can enable TLS encryption and/or SMTP authentication if you
# want them.

tls:
  mode: starttls
  certfile: /path/to/certificate.pem
  keyfile: /path/to/privatekey.pem

smtp:
  auth:
    basic:
      username: password
      AzureDiamond: hunter2

Easy TLS with Traefik

Given the popularity of Let's Encrypt, it can be a pain to get Mailrise to work with automatic certificate renewals. For easy TLS setup, I recommend running Mailrise in plaintext mode while using a fully-featured ACME client like Traefik to handle encryption for you.

docker-compose.yml:

mailrise:
  image: yoryan/mailrise
  container_name: mailrise
  restart: unless-stopped
  volumes:
    - ./mailrise.conf:/etc/mailrise.conf:ro
  labels:
    traefik.tcp.routers.mailrise.rule: "HostSNI(`*`)"
    traefik.tcp.routers.mailrise.tls: "true"
    traefik.tcp.routers.mailrise.tls.certresolver: "letsencrypt"
    traefik.tcp.routers.mailrise.tls.domains[0].main: "my.public.mailrise.domain.com"
    traefik.tcp.routers.mailrise.tls.domains[0].sans: ""
    traefik.tcp.routers.mailrise.entrypoints: "mailsecure"

traefik.yml:

entryPoints:
  mailsecure:
    address: ":465"

certificatesResolvers:
  letsencrypt:
    # ...

SMTP clients can then connect to my.public.mailrise.domain.com, on port 465, using the TLS-on-connect mode.

Custom routers and authenticators

If you are handy with Python and want to overcome the limitations of the configuration format, you can replace Mailrise's notification routing and SMTP authentication logic with your own. Use the import_code directive in your configuration file with the path to a Python source file.

The router class, if provided, should be stored in a module-level variable named router. The authenticator callback, if provided, should be stored in a module-level variable named authenticator.

For further details, refer to the sample file used for testing, the Mailrise router API, and the aiosmtpd authenticator callback.