How to use the broadlink.mp1 function in broadlink

return devices_dict
    elif device_type == 'test':
        return configure_device(TestDevice(cf), topic_prefix)
    else:
        host = (cf.get('device_host'), 80)
        mac = bytearray.fromhex(cf.get('device_mac').replace(':', ' '))
        if device_type == 'rm':
            device = broadlink.rm(host=host, mac=mac, devtype=0x2712)
        elif device_type == 'sp1':
            device = broadlink.sp1(host=host, mac=mac, devtype=0)
        elif device_type == 'sp2':
            device = broadlink.sp2(host=host, mac=mac, devtype=0x2711)
        elif device_type == 'a1':
            device = broadlink.a1(host=host, mac=mac, devtype=0x2714)
        elif device_type == 'mp1':
            device = broadlink.mp1(host=host, mac=mac, devtype=0x4EB5)
        elif device_type == 'dooya':
            device = broadlink.dooya(host=host, mac=mac, devtype=0x4E4D)
        elif device_type == 'bg1':
            device = broadlink.bg1(host=host, mac=mac, devtype=0x51E3)
        else:
            logging.error('Incorrect device configured: ' + device_type)
            sys.exit(2)
        return configure_device(device, topic_prefix)

device_config.get(CONF_FRIENDLY_NAME, object_id),
                    broadlink_device,
                    device_config.get(CONF_COMMAND_ON),
                    device_config.get(CONF_COMMAND_OFF),
                    retry_times,
                )
            )
    elif switch_type in SP1_TYPES:
        broadlink_device = broadlink.sp1((ip_addr, 80), mac_addr, None)
        switches = [BroadlinkSP1Switch(friendly_name, broadlink_device, retry_times)]
    elif switch_type in SP2_TYPES:
        broadlink_device = broadlink.sp2((ip_addr, 80), mac_addr, None)
        switches = [BroadlinkSP2Switch(friendly_name, broadlink_device, retry_times)]
    elif switch_type in MP1_TYPES:
        switches = []
        broadlink_device = broadlink.mp1((ip_addr, 80), mac_addr, None)
        parent_device = BroadlinkMP1Switch(broadlink_device, retry_times)
        for i in range(1, 5):
            slot = BroadlinkMP1Slot(
                _get_mp1_slot_name(friendly_name, i),
                broadlink_device,
                i,
                parent_device,
                retry_times,
            )
            switches.append(slot)

    broadlink_device.timeout = config.get(CONF_TIMEOUT)
    try:
        broadlink_device.auth()
    except OSError:
        _LOGGER.error("Failed to connect to device")

def setup_platform(hass, config, add_entities, discovery_info=None):
    """Set up the Broadlink switches."""
    import broadlink
    devices = config.get(CONF_SWITCHES)
    ip_addr = config.get(CONF_HOST)
    friendly_name = config.get(CONF_FRIENDLY_NAME)
    mac_addr = binascii.unhexlify(
        config.get(CONF_MAC).encode().replace(b':', b''))
    switch_type = config.get(CONF_TYPE)
	
    broadlink_device = broadlink.mp1((ip_addr, 80), mac_addr, None)
    if switch_type == "mp11":
        switches = [BroadlinkMP11Switch(friendly_name, broadlink_device)]
    if switch_type == "mp12":
        switches = [BroadlinkMP12Switch(friendly_name, broadlink_device)]
    if switch_type == "mp13":
        switches = [BroadlinkMP13Switch(friendly_name, broadlink_device)]			
    if switch_type == "mp14":
        switches = [BroadlinkMP14Switch(friendly_name, broadlink_device)]

    broadlink_device.timeout = config.get(CONF_TIMEOUT)
    try:
        broadlink_device.auth()
    except OSError:
        _LOGGER.error("Failed to connect to device")

    add_entities(switches)

settingsFile.set(device.hostname,'Type',device.type.upper())
                device.auth()
                print ("%s: Found %s on %s (%s) type: %s" % (device.hostname, device.type, device.host, hexmac, hex(device.devtype)))
            settingsFile.write(broadlinkControlIniFile)
            broadlinkControlIniFile.close()
        except StandardError as e:
            print ("Error writing settings file: %s" % e)
            restoreSettings()
    else:
        devices = []
    if settings.DevList:
        for devname in settings.DevList:
            if Dev[devname,'Type'] == 'RM' or Dev[devname,'Type'] == 'RM2':
                device = broadlink.rm((Dev[devname,'IPAddress'], 80), Dev[devname,'MACAddress'], Dev[devname,'Device'])
            if Dev[devname,'Type'] == 'MP1':
                device = broadlink.mp1((Dev[devname,'IPAddress'], 80), Dev[devname,'MACAddress'], Dev[devname,'Device'])
            if Dev[devname,'Type'] == 'SP1':
                device = broadlink.sp1((Dev[devname,'IPAddress'], 80), Dev[devname,'MACAddress'], Dev[devname,'Device'])
            if Dev[devname,'Type'] == 'SP2':
                device = broadlink.sp2((Dev[devname,'IPAddress'], 80), Dev[devname,'MACAddress'], Dev[devname,'Device'])
            if Dev[devname,'Type'] == 'A1':
                device = broadlink.a1((Dev[devname,'IPAddress'], 80), Dev[devname,'MACAddress'], Dev[devname,'Device'])
            if Dev[devname,'Type'] == 'HYSEN':
                device = broadlink.hysen((Dev[devname,'IPAddress'], 80), Dev[devname,'MACAddress'], Dev[devname,'Device'])
            if Dev[devname,'Type'] == 'S1C':
                device = broadlink.S1C((Dev[devname,'IPAddress'], 80), Dev[devname,'MACAddress'], Dev[devname,'Device'])
            if Dev[devname,'Type'] == 'DOOYA':
                device = broadlink.dooya((Dev[devname,'IPAddress'], 80), Dev[devname,'MACAddress'], Dev[devname,'Device'])
            device.timeout = Dev[devname,'Timeout']
            if not devname in DeviceByName:
                device.hostname = devname
                device.auth()