ioBroker.mytime

IMPORTANT

Only the english documentation is valid as the automatic translation translates areas that should not be translated.

mytime adapter for ioBroker

This adapter handle Time (eg: countdown,etc.). The countdown functionality provides datapoints that you can use to manage a countdown (e.g. in a script). The adapter also includes several widgets to visualize these countdowns. Time series can be used to create complex time series at which the data points are triggered.

Configuration

Countdown

In the configuration dialog Tab "Countdown" you can create a new countdown eg 'test', set timer to 10 seconds and import the following widgets. Datapoints are pre configured for a countdown named test.

Stop behaviour timer

After the countdown gets the signal stop, the countdown resets to the time set by timer.

Stop behaviour zero

After the countdown gets the signal stop, the countdown remains at 0.

Timeseries

In the configuration dialog Tab "Timeseries" you can create a new timeseries with one or more timerules. For each timerule you can define different parameters Each timeseries creates a seperate datapoint which is triggered at the calculated time events. The time events are calculated in real time. However, the rrule library used is not yet perfect in all parameter combinations. This shows that with some combinations the page goes into an endless loop. The demo page can also be used for experiments. Additional to add a timerule, you can add a timerule to exclude time events, to add single time events and also to exclude single time events.

Usage

Usage of Timeseries

Available Datapoints of a timeserie

After configuration of a new timeserie the adapter creates the following datapoints:

datapoint	description
action	actual state of thie timeserie. possible values are stop,run
cmd	no function atm

Available action states

action	description
stop	no time event is active at the moment
run	a time event was triggered. after the configured duration time, the datapoint changes to stop

Usage of Countdown

Available Datapoints of a countdown

After configuration of a new countdown the adapter creates the following datapoints:

datapoint	description
action	actual state of thie countdown. possible values are stop,run,pause,end
cmd	datapoint for commands. possible commands are described below
start	datapoint for the start time in milliseconds
end	datapoint for the end time in milliseconds
timer	datapoint for the total time set in milliseconds

Available action states of a countdown

action	description
stop	the countdown is stopped, start and end time is set to 0
run	the countdown runs. if the countdown reachs the end time. the action switchs to end
pause	countdown is in pausemode. the end time was set to the time of the pause
end	the countdown is ended. this state you can use as a trigger for further actions (sound, popups, etc.)

Available commands for the cmd datapoint

command	example	description
+value	+1:10	adds time to the countdown setting. the setting will be taken into account at the next start
+!value	+!1:10	like + operator and extend the running timer
-value	-1:2:3	subtracts time from the countdown. the setting will be taken into account at the next start
-!value	-!1:2:3	like - operator and reduce the running timer
=value	=5:00	set the countdowntimer to this time.
=!value	=!5:00	like = operator and set running timer to the given time
#ISO-Date	#2025-01-01T10:00:00	set the countdowntimer to a target time. The Time must be formatted as ISO-Datestring
#!ISO-Date	#!2025-01-01T10:00:00	like # operator and setting running timer to the given target time
$Time	$20:15	set the countdowntimer to a target time. If Time is before current time. the next day is set.
$!Time	$!20:15	like $ operator and setting running timer to the given target time
start	start	starts the countdown
stop	stop	stops the countdown. the countdown time is reset to the setting
pause	pause	pauses the countdown
end	end	stops the countdown. the countdown is set to 0
reset	reset	reset the timer to the configuration state
setstop2timer	setstop2timer	set stop behaviour configuration to timer
setstop2zero	setstop2zero	set stop behaviour configuration to zeros
save	save	save the configuration defined in datapoints to the iobroker configuration
		iobroker restarts the adapter after saving automatically

Format of the value for setting the countdown timer

you can set the countdown to an unlimited time. the notation of the value is [days:[hours:[minutes:[seconds]]]] days,hours and minutes are optional. if you want to set the timer to one day you have to set hours,minutes and second aswell you dont have to respect the normal value ranges (eg hours 0-24). you can also set 48 hours. if you want you can set irregular time notations. the time is summed up seperatly

Examples:

setting	description
1:0:0:0	set/adds/subtracts 1 day to the timer
2:0:0	set/adds/subtracts 2 hours to the timer
3:0	set/adds/subtracts 3 minutes to the timer
120	set/adds/subtracts 120 seconds to the timer
48:0:0	set/adds/subtracts 48 hours to the timer
48:75:120	set/adds/subtracts the timer

Format of the template to format the countdown output in the widget

The following placeholders are available:

placeholder	description
d	days without leading zeros
dd	days with leading zeros
H	hours without leading zeros
HH	hours with leading zeros
m	minutes without leading zeros
mm	minutes with leading zeros
s	seconds without leading zeros
ss	seconds with leading zeros
\	Escape character if you want to use a placeholder in the output

Examples:

All following Examples with countdown timer 1:2:3:4

template	example	result
d\d Hh m\m s\s	1d 2h 3m 4s	with escape-characters and without leading zeros
dd\d HHh mm\m ss\s	01d 02h 03m 04s	with escape-characters and with leading zeros
ss\s	93784s	only seconds
dd\d HH\h	01d 02h	only days and hours
HH\h mm\m	26h 03m	only hours and minutes

Widgets

Widget Countdown plain

A countdown widget for a plain textual output

Widget Properties

oid

The timer datapoint of a countdown datapoint.

Format

Formats the timer output. default is mm:ss. for details see Chapter format template

Example widget code

the widgets are preconfigured for a countdown named test.

[
  {
    "tpl": "tplMyTimeCountdownPlain",
    "data": {
      "g_fixed": false,
      "g_visibility": false,
      "g_css_font_text": false,
      "g_css_background": false,
      "g_css_shadow_padding": false,
      "g_css_border": false,
      "g_gestures": false,
      "g_signals": false,
      "g_last_change": false,
      "visibility-cond": "==",
      "visibility-val": 1,
      "visibility-groups-action": "hide",
      "signals-cond-0": "==",
      "signals-val-0": true,
      "signals-icon-0": "/vis/signals/lowbattery.png",
      "signals-icon-size-0": 0,
      "signals-blink-0": false,
      "signals-horz-0": 0,
      "signals-vert-0": 0,
      "signals-hide-edit-0": false,
      "signals-cond-1": "==",
      "signals-val-1": true,
      "signals-icon-1": "/vis/signals/lowbattery.png",
      "signals-icon-size-1": 0,
      "signals-blink-1": false,
      "signals-horz-1": 0,
      "signals-vert-1": 0,
      "signals-hide-edit-1": false,
      "signals-cond-2": "==",
      "signals-val-2": true,
      "signals-icon-2": "/vis/signals/lowbattery.png",
      "signals-icon-size-2": 0,
      "signals-blink-2": false,
      "signals-horz-2": 0,
      "signals-vert-2": 0,
      "signals-hide-edit-2": false,
      "lc-type": "last-change",
      "lc-is-interval": true,
      "lc-is-moment": false,
      "lc-format": "",
      "lc-position-vert": "top",
      "lc-position-horz": "right",
      "lc-offset-vert": 0,
      "lc-offset-horz": 0,
      "lc-font-size": "12px",
      "lc-font-family": "",
      "lc-font-style": "",
      "lc-bkg-color": "",
      "lc-color": "",
      "lc-border-width": "0",
      "lc-border-style": "",
      "lc-border-color": "",
      "lc-border-radius": 10,
      "lc-zindex": 0,
      "countdown_oid": "mytime.0.Countdown.test.timer",
      "format": "d H m s"
    },
    "style": { "left": "771px", "top": "143px", "width": "151px", "height": "16px" },
    "widgetSet": "mytime"
  },
  {
    "tpl": "tplJquiButtonState",
    "data": {
      "oid": "mytime.0.Countdown.test.cmd",
      "g_fixed": true,
      "g_visibility": false,
      "g_css_font_text": true,
      "g_css_background": true,
      "g_css_shadow_padding": true,
      "g_css_border": true,
      "g_gestures": false,
      "g_signals": false,
      "g_last_change": false,
      "buttontext": "+10s",
      "signals-cond-0": "==",
      "signals-val-0": true,
      "signals-icon-0": "/vis/signals/lowbattery.png",
      "signals-icon-size-0": 0,
      "signals-blink-0": false,
      "signals-horz-0": 0,
      "signals-vert-0": 0,
      "signals-hide-edit-0": false,
      "signals-cond-1": "==",
      "signals-val-1": true,
      "signals-icon-1": "/vis/signals/lowbattery.png",
      "signals-icon-size-1": 0,
      "signals-blink-1": false,
      "signals-horz-1": 0,
      "signals-vert-1": 0,
      "signals-hide-edit-1": false,
      "signals-cond-2": "==",
      "signals-val-2": true,
      "signals-icon-2": "/vis/signals/lowbattery.png",
      "signals-icon-size-2": 0,
      "signals-blink-2": false,
      "signals-horz-2": 0,
      "signals-vert-2": 0,
      "signals-hide-edit-2": false,
      "lc-type": "last-change",
      "lc-is-interval": true,
      "lc-is-moment": false,
      "lc-format": "",
      "lc-position-vert": "top",
      "lc-position-horz": "right",
      "lc-offset-vert": 0,
      "lc-offset-horz": 0,
      "lc-font-size": "12px",
      "lc-font-family": "",
      "lc-font-style": "",
      "lc-bkg-color": "",
      "lc-color": "",
      "lc-border-width": "0",
      "lc-border-style": "",
      "lc-border-color": "",
      "lc-border-radius": 10,
      "lc-zindex": 0,
      "value": "+10",
      "visibility-cond": "==",
      "visibility-val": 1,
      "visibility-groups-action": "hide",
      "class": "mytime"
    },
    "style": {
      "left": "742px",
      "top": "111px",
      "color": "white",
      "font-weight": "lighter",
      "font-size": "x-small",
      "background": "",
      "border-width": "2px",
      "border-style": "solid",
      "border-color": "white",
      "border-radius": "10px",
      "background-color": "#303030 !important",
      "box-shadow": "2px 2px 3px rgba(20, 20, 20, 50)",
      "width": "55px"
    },
    "widgetSet": "jqui"
  },
  {
    "tpl": "tplJquiButtonState",
    "data": {
      "oid": "mytime.0.Countdown.test.cmd",
      "g_fixed": true,
      "g_visibility": false,
      "g_css_font_text": true,
      "g_css_background": true,
      "g_css_shadow_padding": true,
      "g_css_border": true,
      "g_gestures": false,
      "g_signals": false,
      "g_last_change": false,
      "buttontext": "-10s",
      "signals-cond-0": "==",
      "signals-val-0": true,
      "signals-icon-0": "/vis/signals/lowbattery.png",
      "signals-icon-size-0": 0,
      "signals-blink-0": false,
      "signals-horz-0": 0,
      "signals-vert-0": 0,
      "signals-hide-edit-0": false,
      "signals-cond-1": "==",
      "signals-val-1": true,
      "signals-icon-1": "/vis/signals/lowbattery.png",
      "signals-icon-size-1": 0,
      "signals-blink-1": false,
      "signals-horz-1": 0,
      "signals-vert-1": 0,
      "signals-hide-edit-1": false,
      "signals-cond-2": "==",
      "signals-val-2": true,
      "signals-icon-2": "/vis/signals/lowbattery.png",
      "signals-icon-size-2": 0,
      "signals-blink-2": false,
      "signals-horz-2": 0,
      "signals-vert-2": 0,
      "signals-hide-edit-2": false,
      "lc-type": "last-change",
      "lc-is-interval": true,
      "lc-is-moment": false,
      "lc-format": "",
      "lc-position-vert": "top",
      "lc-position-horz": "right",
      "lc-offset-vert": 0,
      "lc-offset-horz": 0,
      "lc-font-size": "12px",
      "lc-font-family": "",
      "lc-font-style": "",
      "lc-bkg-color": "",
      "lc-color": "",
      "lc-border-width": "0",
      "lc-border-style": "",
      "lc-border-color": "",
      "lc-border-radius": 10,
      "lc-zindex": 0,
      "value": "-10",
      "visibility-cond": "==",
      "visibility-val": 1,
      "visibility-groups-action": "hide",
      "class": "mytime"
    },
    "style": {
      "left": "801px",
      "top": "111px",
      "color": "white",
      "font-weight": "lighter",
      "font-size": "x-small",
      "background": "",
      "border-width": "2px",
      "border-style": "solid",
      "border-color": "white",
      "border-radius": "10px",
      "background-color": "#303030 !important",
      "box-shadow": "2px 2px 3px rgba(20, 20, 20, 50)",
      "width": "55px"
    },
    "widgetSet": "jqui"
  },
  {
    "tpl": "tplJquiButtonState",
    "data": {
      "oid": "mytime.0.Countdown.test.cmd",
      "g_fixed": true,
      "g_visibility": false,
      "g_css_font_text": true,
      "g_css_background": true,
      "g_css_shadow_padding": true,
      "g_css_border": true,
      "g_gestures": false,
      "g_signals": false,
      "g_last_change": false,
      "buttontext": "=10",
      "signals-cond-0": "==",
      "signals-val-0": true,
      "signals-icon-0": "/vis/signals/lowbattery.png",
      "signals-icon-size-0": 0,
      "signals-blink-0": false,
      "signals-horz-0": 0,
      "signals-vert-0": 0,
      "signals-hide-edit-0": false,
      "signals-cond-1": "==",
      "signals-val-1": true,
      "signals-icon-1": "/vis/signals/lowbattery.png",
      "signals-icon-size-1": 0,
      "signals-blink-1": false,
      "signals-horz-1": 0,
      "signals-vert-1": 0,
      "signals-hide-edit-1": false,
      "signals-cond-2": "==",
      "signals-val-2": true,
      "signals-icon-2": "/vis/signals/lowbattery.png",
      "signals-icon-size-2": 0,
      "signals-blink-2": false,
      "signals-horz-2": 0,
      "signals-vert-2": 0,
      "signals-hide-edit-2": false,
      "lc-type": "last-change",
      "lc-is-interval": true,
      "lc-is-moment": false,
      "lc-format": "",
      "lc-position-vert": "top",
      "lc-position-horz": "right",
      "lc-offset-vert": 0,
      "lc-offset-horz": 0,
      "lc-font-size": "12px",
      "lc-font-family": "",
      "lc-font-style": "",
      "lc-bkg-color": "",
      "lc-color": "",
      "lc-border-width": "0",
      "lc-border-style": "",
      "lc-border-color": "",
      "lc-border-radius": 10,
      "lc-zindex": 0,
      "value": "=10",
      "visibility-cond": "==",
      "visibility-val": 1,
      "visibility-groups-action": "hide",
      "class": "mytime"
    },
    "style": {
      "left": "864px",
      "top": "111px",
      "color": "white",
      "font-weight": "lighter",
      "font-size": "x-small",
      "background": "",
      "border-width": "2px",
      "border-style": "solid",
      "border-color": "white",
      "border-radius": "10px",
      "background-color": "#303030 !important",
      "box-shadow": "2px 2px 3px rgba(20, 20, 20, 50)",
      "width": "55px"
    },
    "widgetSet": "jqui"
  },
  {
    "tpl": "tplJquiButtonState",
    "data": {
      "oid": "mytime.0.Countdown.test.cmd",
      "g_fixed": true,
      "g_visibility": false,
      "g_css_font_text": true,
      "g_css_background": true,
      "g_css_shadow_padding": true,
      "g_css_border": true,
      "g_gestures": false,
      "g_signals": false,
      "g_last_change": false,
      "buttontext": "start",
      "signals-cond-0": "==",
      "signals-val-0": true,
      "signals-icon-0": "/vis/signals/lowbattery.png",
      "signals-icon-size-0": 0,
      "signals-blink-0": false,
      "signals-horz-0": 0,
      "signals-vert-0": 0,
      "signals-hide-edit-0": false,
      "signals-cond-1": "==",
      "signals-val-1": true,
      "signals-icon-1": "/vis/signals/lowbattery.png",
      "signals-icon-size-1": 0,
      "signals-blink-1": false,
      "signals-horz-1": 0,
      "signals-vert-1": 0,
      "signals-hide-edit-1": false,
      "signals-cond-2": "==",
      "signals-val-2": true,
      "signals-icon-2": "/vis/signals/lowbattery.png",
      "signals-icon-size-2": 0,
      "signals-blink-2": false,
      "signals-horz-2": 0,
      "signals-vert-2": 0,
      "signals-hide-edit-2": false,
      "lc-type": "last-change",
      "lc-is-interval": true,
      "lc-is-moment": false,
      "lc-format": "",
      "lc-position-vert": "top",
      "lc-position-horz": "right",
      "lc-offset-vert": 0,
      "lc-offset-horz": 0,
      "lc-font-size": "12px",
      "lc-font-family": "",
      "lc-font-style": "",
      "lc-bkg-color": "",
      "lc-color": "",
      "lc-border-width": "0",
      "lc-border-style": "",
      "lc-border-color": "",
      "lc-border-radius": 10,
      "lc-zindex": 0,
      "value": "start",
      "visibility-cond": "==",
      "visibility-val": 1,
      "visibility-groups-action": "hide",
      "class": "mytime"
    },
    "style": {
      "left": "742px",
      "top": "163px",
      "color": "white",
      "font-weight": "lighter",
      "font-size": "x-small",
      "background": "",
      "border-width": "2px",
      "border-style": "solid",
      "border-color": "white",
      "border-radius": "10px",
      "background-color": "#303030 !important",
      "box-shadow": "2px 2px 3px rgba(20, 20, 20, 50)",
      "width": "55px"
    },
    "widgetSet": "jqui"
  },
  {
    "tpl": "tplJquiButtonState",
    "data": {
      "oid": "mytime.0.Countdown.test.cmd",
      "g_fixed": true,
      "g_visibility": false,
      "g_css_font_text": true,
      "g_css_background": true,
      "g_css_shadow_padding": true,
      "g_css_border": true,
      "g_gestures": false,
      "g_signals": false,
      "g_last_change": false,
      "buttontext": "pause",
      "signals-cond-0": "==",
      "signals-val-0": true,
      "signals-icon-0": "/vis/signals/lowbattery.png",
      "signals-icon-size-0": 0,
      "signals-blink-0": false,
      "signals-horz-0": 0,
      "signals-vert-0": 0,
      "signals-hide-edit-0": false,
      "signals-cond-1": "==",
      "signals-val-1": true,
      "signals-icon-1": "/vis/signals/lowbattery.png",
      "signals-icon-size-1": 0,
      "signals-blink-1": false,
      "signals-horz-1": 0,
      "signals-vert-1": 0,
      "signals-hide-edit-1": false,
      "signals-cond-2": "==",
      "signals-val-2": true,
      "signals-icon-2": "/vis/signals/lowbattery.png",
      "signals-icon-size-2": 0,
      "signals-blink-2": false,
      "signals-horz-2": 0,
      "signals-vert-2": 0,
      "signals-hide-edit-2": false,
      "lc-type": "last-change",
      "lc-is-interval": true,
      "lc-is-moment": false,
      "lc-format": "",
      "lc-position-vert": "top",
      "lc-position-horz": "right",
      "lc-offset-vert": 0,
      "lc-offset-horz": 0,
      "lc-font-size": "12px",
      "lc-font-family": "",
      "lc-font-style": "",
      "lc-bkg-color": "",
      "lc-color": "",
      "lc-border-width": "0",
      "lc-border-style": "",
      "lc-border-color": "",
      "lc-border-radius": 10,
      "lc-zindex": 0,
      "value": "pause",
      "visibility-cond": "==",
      "visibility-val": 1,
      "visibility-groups-action": "hide",
      "class": "mytime"
    },
    "style": {
      "left": "801px",
      "top": "163px",
      "color": "white",
      "font-weight": "lighter",
      "font-size": "x-small",
      "background": "",
      "border-width": "2px",
      "border-style": "solid",
      "border-color": "white",
      "border-radius": "10px",
      "background-color": "#303030 !important",
      "box-shadow": "2px 2px 3px rgba(20, 20, 20, 50)",
      "width": "55px"
    },
    "widgetSet": "jqui"
  },
  {
    "tpl": "tplJquiButtonState",
    "data": {
      "oid": "mytime.0.Countdown.test.cmd",
      "g_fixed": true,
      "g_visibility": false,
      "g_css_font_text": true,
      "g_css_background": true,
      "g_css_shadow_padding": true,
      "g_css_border": true,
      "g_gestures": false,
      "g_signals": false,
      "g_last_change": false,
      "buttontext": "stop",
      "signals-cond-0": "==",
      "signals-val-0": true,
      "signals-icon-0": "/vis/signals/lowbattery.png",
      "signals-icon-size-0": 0,
      "signals-blink-0": false,
      "signals-horz-0": 0,
      "signals-vert-0": 0,
      "signals-hide-edit-0": false,
      "signals-cond-1": "==",
      "signals-val-1": true,
      "signals-icon-1": "/vis/signals/lowbattery.png",
      "signals-icon-size-1": 0,
      "signals-blink-1": false,
      "signals-horz-1": 0,
      "signals-vert-1": 0,
      "signals-hide-edit-1": false,
      "signals-cond-2": "==",
      "signals-val-2": true,
      "signals-icon-2": "/vis/signals/lowbattery.png",
      "signals-icon-size-2": 0,
      "signals-blink-2": false,
      "signals-horz-2": 0,
      "signals-vert-2": 0,
      "signals-hide-edit-2": false,
      "lc-type": "last-change",
      "lc-is-interval": true,
      "lc-is-moment": false,
      "lc-format": "",
      "lc-position-vert": "top",
      "lc-position-horz": "right",
      "lc-offset-vert": 0,
      "lc-offset-horz": 0,
      "lc-font-size": "12px",
      "lc-font-family": "",
      "lc-font-style": "",
      "lc-bkg-color": "",
      "lc-color": "",
      "lc-border-width": "0",
      "lc-border-style": "",
      "lc-border-color": "",
      "lc-border-radius": 10,
      "lc-zindex": 0,
      "value": "stop",
      "visibility-cond": "==",
      "visibility-val": 1,
      "visibility-groups-action": "hide",
      "class": "mytime"
    },
    "style": {
      "left": "864px",
      "top": "163px",
      "color": "white",
      "font-weight": "lighter",
      "font-size": "x-small",
      "background": "",
      "border-width": "2px",
      "border-style": "solid",
      "border-color": "white",
      "border-radius": "10px",
      "background-color": "#303030 !important",
      "box-shadow": "2px 2px 3px rgba(20, 20, 20, 50)",
      "width": "55px"
    },
    "widgetSet": "jqui"
  }
]

The actual action state (cdstop,cdrun,cdpause,cdend) of the countdown is available as CSS-Class selector:

#w00000 .timer.cdend {
  color: red;
}
#w00000 .timer.cdrun {
  color: green;
}

Widget Reverse Countdown plain

A widget that shows the elapsed time from a given point in time

Widget Properties of Reverse Countdown plain

Datapoint	Description
datetime	A DateTime-String of the start time. The expression must be interpretable by the javascript function new Date(expression). See also Example: 2022-01-10 23:12 or 2022-01-104T23:12:00.000Z
Format	Formats the timer output. default is mm:ss. for details see Chapter format template
HTML-Prepend	This text or html is prepended to the output of the widget
HTML-Append	This text or html is appended to the output of the widget

Widget Countdown Circle

A countdown widget in a ring/circle design.

Widget Properties of Countdown Circle

Datapoint	Description
oid	The timer datapoint of a countdown datapoint.
notimetext	Disables the time text over the polar clock
Format	Formats the timer output. default is mm:ss. for details see Chapter format template. ReversevSetting for growing or shrinking the ring/circle
Width	The width of the ring or circle.
Ring gap	Gap in pixel between the rings
Caps	Setting for the ends of the ring/circle: round or straight
background	Backgroundcolor of the ring/circle
foreground	Foregroundcolor of the ring/circle
showsec	Show the ring of seconds
showmin	Show the ring of minutes
showhrs	Show the ring of minutes
showday	Show the ring of days

The actual action state (cdstop,cdrun,cdpause,cdend) of the countdown is available as CSS-Class selector:

#w00000 .timer.cdend {
  color: red;
}
#w00000 .timer.cdrun {
  color: green;
}

Widget Countdown FlipClock

A countdown widget in a airport flip board style

Widget Properties of Countdown FlipClock

Datapoint	Description
oid	The timer datapoint of a countdown datapoint.
countdown_showsec	Shows the seconds-part. there must be no gap between two units.
countdown_showmin	Shows the minute-part. there must be no gap between two units.
countdown_showhrs	Shows the hours-part. there must be no gap between two units.
countdown_showday	Shows the day-part. there must be no gap between two units.
countdown_color	Color of the countdowntimer
countdown_background_color	Backgroundcolor of the countdowntimer
countdown_dot_color	Color of the dots of the countdowntimer

Tips:

If you want to adjust the size of the countdown flipclock, under css settings in vis you can enter for half size: Group CSS-Common / transform "scale(0.5)"

The actual action state (cdstop,cdrun,cdpause,cdend) of the countdown is available as CSS-Class selector:

#w00000 .timer.cdend {
  color: red;
}
#w00000 .timer.cdrun {
  color: green;
}

Widget Countdown NixieClock

A countdown widget in a Nixie-Tube/LED style

Widget Properties of Countdown NixieClock

Datapoint	Description
oid	The timer datapoint of a countdown datapoint.
countdown_showsec	Shows the seconds-part. there must be no gap between two units.
countdown_showmin	Shows the minute-part. there must be no gap between two units.
countdown_showhrs	Shows the hours-part. there must be no gap between two units.
countdown_showday	Shows the day-part. there must be no gap between two units.
countdown_color_active	Color of the countdowntimer
countdown_color_inactive	Color of the inactiv digits
countdown_opacity_inactive	Opacity of the color of the inactive digits
countdown_glowcolor	Color of the glow around thie Nixie-digits

Widget Wordclock

A widget to show a wordclock with many options

Widget Properties of Wordclock

Datapoint	Description
language	Some different languages for the wordclock are available
letterActivated	Color for the highlighted words
letterDeactivated	Color for the normal letters
wordclockMargin	Margin between the wordclock and the LEDs
withMinutes	Show the Minute-LEDs in the Corner of the wordclock
minuteSize	Size in Pixels of the Minute LEDs
minuteColor	color of the Minute LED
withSeconds	Show the Seconds-LEDs of the wordclock
secondSize	Size in Pixels of the Seconds LEDs
secondColor	color of the Seconds LED
timezone	The time of the selected timezone is displayed

Tips:

If you want to adjust the size of the countdown nixieclock, under css settings in vis you can enter for half size: Group CSS-Common / transform "scale(0.5)"

The actual action state (cdstop,cdrun,cdpause,cdend) of the countdown is available as CSS-Class selector:

#w00000 .timer.cdend {
  color: red;
}
#w00000 .timer.cdrun {
  color: green;
}

Todo

• 7segment display
• rolling numbers
• customizable fonts
• ts: timerules for exclusion (time range, single dates)
• add timezone for wordclock
• wordclock timer
• timed scheduler: plan single date/time and recurring events like outlook
• Nixie style
• flip board display (airport-display)
• new command to set only target time without date
• ~~countdown circle widget with option to disable countdown text
• Groupseperator '.' in Name
• Polar clock
• circle reverse
• circle with round caps

Changelog

1.1.0 (2024-11-12)

• add some new commands to restart the countdown time in place
• repair save command
• removed vis dependency from io-package.json

1.0.15 (2024-11-11)

• repair issues from repochecker

1.0.14 (2024-11-11)

• improve test and release process
• update github workflow
• remove eslint command from package.json
• switch back to node 18 for testing due to airbnb error
• more repair
• add package-lock.json to git
• remove unused library
• add lint and lint
• remove iobroker eslint
• general revision
• updating the configuration dialogs for countdown and timeseries in jsonConfig and custom react

0.7.12

• add html_prepend and html_append properties to the widget reverse countdown

0.7.10

• add widget reverse countdown

0.7.9

• add more wordclock tests
• fix wordclock matrix swiss

0.7.8

• add timezone for wordclock

0.7.7

• add timezone for wordclock

0.7.6

• add tests for wordclock * remove admin tab

0.7.5

• Remove comments in io-package

0.7.4

• fix spanish language pack

0.7.3

• add turkish language for wordclock

0.7.2

• add russian and espaniol language for wordclock

0.7.1

• add margin property for wordclock
• add italiano and francais for wordclock
• wordclock remove border

0.7.0

• New widget wordclock

0.6.1

• remove beta tag from widgets * m,assive reengeneering of the react classes, add functions für exclusion rules, adding single time events and exclude single time events

0.6.0

• Introduction of new functionality timeseries

0.5.2

• fix an issue and introduce a new command save to save the configuration defined in datapoints to the iobroker configuration data

0.5.1

• Migration of old counters

0.5.0

• Change settings dialog to react

0.4.2

• performance optimization. mytime now checks the data from internal and did not read the data allways from datapoints | update dependencies

0.4.1

• widget cd flipclock: remove dot labels

0.4.0

• New widget NixieClock

0.3.1

• remove mytime tile in iobroker overview
• set initial visual countdown value to 0
• prefix css classes, due css artefacts from other adapters (eg kodi and css class stop)

0.3.0

• new command to set only target time without date
• countdown circle widget now with option to disable countdown text
• timers are now groupable in subdirectories. you can now enter dots (.) as a groupseperater in the name of a timer

0.2.1

• fix timer display in configuration dialog
• fix default template of countdown plain
• add icons for countdonw plain and countdown circle widgets
• fix startangle calculation for countdown circle if time values are 0
• remove timer intervals in editmode due to interfer with the configuration dialog and didnt save the ne values

0.2.0

• extend the countdown circle with more rings for days, hours and minutes

0.1.2

• Setting for growing or shrinking the ring/circle
• Setting for the ends of the ring/circle: round or straight
• Extend special char filtering with umlauts
• Fix state request issue in widget countdown circle

0.1.1

• Add a countdown name datapoint

0.1.0

• Forum release
• initial release

License

MIT License

Copyright (c) 2024 oweitman

Permission is hereby granted, free of charge, to any person obtaining a copy of this software and associated documentation files (the "Software"), to deal in the Software without restriction, including without limitation the rights to use, copy, modify, merge, publish, distribute, sublicense, and/or sell copies of the Software, and to permit persons to whom the Software is furnished to do so, subject to the following conditions:

The above copyright notice and this permission notice shall be included in all copies or substantial portions of the Software.

THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.